Panasonic SC-PTX5 Bedienungsanleitung
5
∫ Batteries
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can severely damage the remote control.
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can severely damage the remote control.
Remove the batteries if the remote control is not going to
be used for a long period of time. Store in a cool, dark
place.
be used for a long period of time. Store in a cool, dark
place.
∫ Use
Aim at the remote control signal sensor (
➜ page 11,
Operations Guide), avoiding obstacles, at a maximum
range of 7 m directly in front of the unit.
range of 7 m directly in front of the unit.
Radio operations are described mainly with the remote
control.
You can alternatively use the corresponding button on
this unit.
control.
You can alternatively use the corresponding button on
this unit.
§1
[SELECTOR]
§2
[
X TUNING W]
§3
[MEMORY]
Up to 30 stations can be set.
step
3
Preparing the remote control
R6/LR6, AA
Insert so the poles (
i and j) match those in the
remote control.
≥ Do not use rechargeable type batteries.
Press in and lift up.
Replace the cover.
step
4
Presetting the radio stations
MANUAL SKIP
ENTER
FM
,
,
Numbered
buttons
SELECTOR
TUNING
MEMORY
-TUNE MODE
1
Press [FM]
§1
to select “FM”.
2
Press [
6, 5]
§2
to select the frequency.
≥ When performing this step on this unit, first press
[-TUNE MODE] to select “MANUAL”, and then
press [
press [
X TUNING W] to select the frequency.
To start automatic tuning, press and hold
[
[
6, 5] until the frequency starts scrolling. Tuning
stops when a station is found.
3
While listening to the broadcast
Press [ENTER]
Press [ENTER]
§3
.
4
While the frequency and “PGM” are flashing on the
display
Press the numbered buttons to select a channel.
≥ To select a 2-digit number
display
Press the numbered buttons to select a channel.
≥ To select a 2-digit number
e.g. 12: [
S10]
➜ [1] ➜ [2]
Alternatively, press [
X, W], and
then press [ENTER]
§3
.
Confirming the preset channels
1
Press [FM]
§1
to select “FM”.
2
Press the numbered buttons to select the
channel.
≥ To select a 2-digit number
channel.
≥ To select a 2-digit number
e.g. 12: [
S10]
➜ [1] ➜ [2]
Alternatively, press [
X, W].
≥ To perform this step on this
unit, first press [-TUNE MODE] to select
“PRESET”, and then press [
“PRESET”, and then press [
X TUNING W] to
select the channel.
DISC SFC
TG
D.MIX MONO SLP
e.g. Display
DISC SFC
TG
D.MIX MONO SLP
e.g. Display
0020_PTX5EB_Setup_Guide.fm Page 5 Wednesday, May 2, 2007 11:41 AM