Panasonic KXTD612NE Bedienungsanleitung

Seite von 243
Operation
86
User Manual
 If the destination is busy or you misdial
 To split the calls
The availability of this feature is depending on the contract with your telephone company.
System programming is required. Consult your dealer.
It is impossible to seize any other CO line during ISDN Call Hold.
After completing the ISDN Call Transferring service, the CO line will be released. You 
cannot return to the held call.
If you go on-hook except for while hearing ringback tone or during a conversation 
with the third party,
 ISDN Call Hold will be canceled and the system will hold the call.
To return to the conversation before the destination answers, press TRANSFER 
(DPT), Recall (SLT), or R key (ISDN Extn.).
It is possible to make a call by using One-Touch Dialling. If the dialled number starts with 
0, 81, 82, or 83, these numbers will be disregarded automatically, even in the case that it is 
not a line access number.
If your extension has been restricted, you might not be able to transfer a call to an 
external party. 
Restricted
 will be displayed, and you will hear reorder tone.
Automatic Route Selection (ARS) will not be applied to the call dialled after .
The number dialled after  will not be recorded to Station Message Detailed Recording 
(SMDR). The charge fee will be counted inclusively as the original call you made or you 
receive.
On-hook.
Talk.
DPT/SLT/ISDN Extn.
While hearing a busy tone or other tone
Press CO or off-hook.
OR
(CO)
DPT
SLT
ISDN Extn.
Press TRANSFER.
During ISDN Call Hold
During ISDN Call Hold
During ISDN Call Hold
Press Recall.
(Recall)
Press R key.