Panasonic TH50PV500B Bedienungsanleitung

56

If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out the suggested check. 

If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both 

found on the rear of the TV).

Snowy Picture

Noisy Sound

Aerial location, direction or connection

Multiple Images

Normal Sound Aerial location, direction or connection

Interference

Noisy Sound

Electrical appliances

Cars / Motorcycles

Fluorescent lights

Switch on P-NR in Picture menu to reduce picture noise.

Normal Picture

No Sound

Volume level

Sound mute switched on.

No Picture

No Sound

TV set to AV mode.

Not plugged into AC outlet.

Not switched on.

Picture / Sound controls set at minimum levels.

Check if in Standby mode.

No Colour

Normal Sound Colour controls set at minimum levels.

Poor or 

Distorted 

Picture

Weak or No 

Sound

Retune Channel (s).

Normal Picture

Weak or 

Distorted 

Sound

Sound reception may have deteriorated.

Switch NICAM setting (Sound menu in Analogue only) to Off until reception 

improves.

H

D

M

I

Poor Video.

(Snow noise, no picture, picture runs, etc.)

HDMI cable is not connected securely.

Turn the power supply of the TV and connected equipment off then turn on.

Check compatibility of input signal from the connected equipment.

The connected equipment must be EIA/CEA-861/861B compliant.

Poor Audio.

Change the audio setting of the connected equipment to L.PCM.

Check the setting of HDMI input in Sound menu.

If the problem is due to the digital audio connection, change to the analogue 

audio connection.

The error message appears.

Please consult an Authorized Service Center.

The SD card cannot be used even when it is formatted.

Please consult an Authorized Service Center.

Some parts of the screen 

do not light up.

The plasma TV panel is manufactured using an extremely high level of precision technology, 

however, sometimes some parts of the screen may be missing picture elements or have luminous 

spots. This is not a malfunction.

After-images appear

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent 

after-image to remain on the Plasma TV.

Examples of still pictures include logos, video games, computer images, teletext and images 

displayed in 4:3 mode.

With no signal present, and without any user operation, the Panasonic screensaver will appear 

automatically after a few minutes to prevent image retention.

During DVB teletext, radio service or menu display, the level of the contrast will decrease 

automatically after a few minutes to prevent image retention.

The permanent after-image on the Plasma TV resulting from fi xed image use is not an operating 

defect and as such is not covered by the Warranty.

This product is not designed to display fi xed images for extended periods of time.

If the set is not switched off when the TV station stops transmitting, it will automatically go to standby mode after 30 minutes. This 

function will not operate when this TV is in AV mode.

• External surfaces of the unit may become hot during operation. But this is completely normal.

• See label on the base of this equipment for ratings and other information.