Panasonic TH50PV500B Bedienungsanleitung

24

For an external recording device to record DVB programmes, the integrated DVB system must be active to provide the signal. 
The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the DVB system will 
switch on and tune to the correct station (even if the TV is in standby mode). If the recording device is compatible with Q-Link or 
similar technologies (see page 34) and connected to the TV’s AV2 / AV4 terminal, you do not need to programme the device – the 
DVB system will control the recording process.
The device must be connected to the TV’s AV2 / AV4 terminal using a SCART cable to record DVB programmes.

Press the MENU button.

Move to Setup menu.

Access Setup menu.

Move to DVB Setup Menu.

Access DVB Setup Menu.

Move to Timer Programming.

Access Timer Programming.

Press the OK button to begin programming.

Select the Programme position to be recorded.

Move to the Date fi eld.

Set the Date on which recording is to take place.

In DVB mode

MENU

EXIT

Ten seconds before the recording is due to start the DVB system will tune to the correct station. If you were already watching another 

DVB station you will see the station change on screen. If you were watching an analogue channel, you will not see the change.

You can continue to watch analogue stations while a timer recording is in progress.

If you attempt to switch to another DVB programme position while a timer recording is in progress the message “DVB Tuner Locked” 

will be displayed. Press the OK button to continue recording, or EXIT to unlock the programme position. Beware that if you press EXIT, 

timer programming for this DVB position will be immediately deleted.

To immediately cancel a recording that is already in progress, press GUIDE then EXIT.

You may not be able to cancel recording just before it starts. Use the recording device to cancel it.

Two minutes before the recording is due to start, a reminder will appear on screen:

Press the OK button to remove the reminder from the screen.

If you wish to cancel the recording, press the EXIT button.
Note: The above 2 operations will not be necessary if the TV set is in standby mode.

OK

Timer Programming

Child Lock

Multi Audio

Access

DVB System Setup

eng

DVB Tuning Menu

Profile Edit

C

OK

1

2

3

4

5

6

7

8

9

0

OK

VCR

1

2

3

4

5

6

7

8

9

0

EXIT

The current Date and Time are shown at the top of the menu.
See page 25 for further Date options.

Move to the Start time fi eld 

 and set the Start time 

 .

Move to the End time fi eld 

 and set the End time 

 .

The duration of the recording is shown in the min. column.

The channel position, start and end times can also be input 
using the numeric buttons on the remote control.

Move to the Subtitles fi eld.

If you wish to record subtitles (if available) select Auto.

Move to the Media fi eld.

Select the recording device. SD: SD card    Ext: External device

Press the OK button to store.

Press the EXIT button to leave the DVB Timer Programming screen.

OK

Notes:
• To delete a timer programme, 

select the recording with the cursor 
bar and press the Red button.

• To edit a previously entered timer 

programme, select it with the 
cursor bar and press the OK 
button.

• Timer programmes can also be 

entered from the TV Guide. See 
page 32.