Panasonic th-152ux1 Bedienungsanleitung
2
Safety Precautions
When using the Plasma Display
The Plasma Display is designed to operate on 200 - 240 V AC, 50/60 Hz.
Do not cover the ventilation holes.
• Doing so may cause the Plasma Display to overheat, which can cause fi re or damage to the Plasma Display.
Do not stick any foreign objects into the Plasma Display.
• Do not insert any metal or fl ammable objects into the ventilations holes or drop them onto the Plasma Display, as
doing so can cause fi re or electric shock.
Do not remove the cover or modify it in any way.
• High voltages which can cause severe electric shocks are present inside the Plasma Display. For any inspection,
adjustment and repair work, please contact your local Panasonic dealer.
Always use the breaker dedicated to the Plasma Display.
• Using other breakers may generate heat and cause fi re.
Do not turn on/off the breaker with wet hands.
• Doing so may cause electric shocks.
When using a fused load switch, make sure a fuse of appropriate capacity is used.
• Doing so may cause electric shocks.
Do not do anything that may damage the power cable.
• Do not damage the cable, make any modifi cations to it, place heavy objects on top of it, heat it, place it near any
hot objects, twist it, bend it excessively or pull it. To do so may cause fi re and electric shock. If the power cable is
damaged, have it repaired at your local Panasonic dealer.
damaged, have it repaired at your local Panasonic dealer.
If the Plasma Display is not going to be used for any prolonged length of time, turn off the breaker.
To prevent the spread of fi re, keep candles or other open fl ames away from this product at all times.
If problems occur during use
If a problem occurs (such as no picture), or if smoke or an abnormal odour starts to come out from the Plasma
Display, immediately turn off the breaker.
Display, immediately turn off the breaker.
• If you continue to use the Plasma Display in this condition, fi re or electric shock could result. After checking that
the smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing
the Plasma Display yourself is extremely dangerous, and shall never be done.
the Plasma Display yourself is extremely dangerous, and shall never be done.
If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet
becomes damages, turn off the breaker.
becomes damages, turn off the breaker.
• A short circuit may occur, which could cause fi re. Contact your local Panasonic dealer for any repairs that need to be made.