Greenlee NC-500 Техническое Руководство

Seite von 1
www.greenlee.com
Communications
291
Tel:
 800.435.0786
Fax:
 800.451.2632
Tel:
 800.435.0786
Fax:
 800.524.2853
Tel:
 +1.815.397.7070
Fax:
 +1.815.397.9247
USA
CANAD
A
INTERNA
TIONAL
= NEW PRODUCT
= REPLACEMENT PART
= ACCESSORY
=
NETcat
®
 Pro 2 NC-500
•  Test and troubleshoot telephone, data and coax wiring.
•  NETcat Pro 2 New Features:
–  Gigabit device capability detection (still detects 10baseT and 100baseT too).
–  Cable type, velocity of propagation library, user editable.
–  Power over Ethernet (PoE) detection.
– Memo pad.
•  Detect split pairs, short circuits, broken and crossed wires.
•  Step TDR technology shows length to open or short of all pairs.
•  Test shielded twisted-pair (STP), unshielded twisted-pair (UTP) & coaxial cables.
•  Test patch cords and remote jacks.
•  Touch-screen control, included stylus slots into main unit.
•  Large icons ensure easy use with your finger too.
•  Large 3" (76mm) backlit high-contrast (user adjustable) monochrome display is 
highly visible in dark or brightly lit areas.
•  Remote test and ID unit stores in base of main unit.
•  Can identify up to 8 remote test ID units (7 extra available in NC-510 accessory 
kit along with carrying case).
•  Tone generator with four selectable precision frequency tones, compatible with 
Greenlee advanced digital signal processing probes.
•  Operates on single 9V battery with low battery indication.
STRUCTURED WIRING TESTERS
CAT. NO.
UPC NO.
DESCRIPTION
NC-500
23639
NETcat Pro 2 Digital VDV Wiring Troubleshooter
NC-510
23640
NETcat Pro 2 Accessory Kit w/carry case
SPECIFICATIONS
Dimensions
3.3" x 1.4" x 6.7" (8.5 cm x 3.5 cm x 17 cm)
Weight
0.45 lb. (200 g)
Power 
 Requirements
9V Alkaline battery (PP3)
User Interface
Display LCD  
Viewing Area 
Backlight
Buttons
Dot Pixels: 128 x 128 dots
60.0 x 58.4
White LED
LCD touch-screen, Single  
momentary contact push button
Environmental
Operating 
Temperature
Storage 
Temperature
0°C to 50°C
-20°C to 70°C
Interface 
  Connections
RJ45 shielded jacks
F-type threaded female coaxial connectors
TDR  
  Calibration
TDR Range
User selectable based on a known cable length. 
40% to 100% in steps of 1% 
0 to 2000 ft. - 
Resolution
1 ft. (0.3 m)
Accuracy to 
  Open/Short
±4% or 2 ft. (0.6 m) whichever is greater
Remote 
  Identifier
2000 ft. (609.6 meters) maximum distance
Wiremap
358 ft (100 meters) maximum distance
NC-500
NC-510
(NC-500 not included)
NC-500 Contents:
•  NETcat Pro 2 main unit with stylus
•  Removable remote jack and patch lead test and ID unit
•  Twisted-pair (modular RJ45), coax (F) and alligator clip 
test cords
•  9V alkaline battery
NC-510 NETcat Pro 2 Accessory Kit Contents:
•  Seven additional remote jack test and ID units, 
RJ45 and F (male)
•  Carrying case to hold additional remote test ID units 
and content of NC-500 main kit
C-510