Westermo SDW-532-SM-SC15 Switch Техническое Руководство

www.westermo.com

72

Industrial Ethernet Switch

SDW-532

5 port Switch

The SDW-532 is an unmanaged industrial Ethernet switch with 3 TX (copper) 

10/100 Mbit/s ports and two 100 Mbit/s fibre ports.The TX ports are set up for

auto-negotiation of line speed and full/half duplex connection; however DIP switches

do allow each port to be individually configured if necessary. All TX ports support

MDI/MDI-X which means there will never be a problem as to whether to use a

standard or crossover patch cable.The screen of each TX port is individually isolated

to help prevent earth loop problems within the network.

The unit has a wide DC power input range with polarity protection as well as

being able to accept power from dual sources. With extended temperature range

supported as standard the SDW-532 is a basic switch designed to be used the

harshest environments.

… 5 port switch 3 TX (copper) and 2 FX 

(SC connector) multi mode 2 km (6666 ft)

… Plug and play 

… Can be used as a switch or media converter

… TX chassis individually isolated

… Auto negotiation or manual TX port 

configuration.

… Automatic MDI/MDI-X crossover

… Extended temperature range –25°C to

+70°C (–13°F to +158°F) 

… LEDs for diagnostics

… Redundant power

… Wide DC power range

… LC, SC or ST fibre interface

… Single or multi mode fibre