Pro-Ject Amp Box 3081020007 Merkblatt
Produktcode
3081020007
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 1.12.08
Pro-Ject Amp Box
Stereo power amp
Product information
Good sound from sound technology
Metal case shields the electronics from vibrational and electromagnetic interference
Bi-Phase PWM-circuit (Pulse Width Modulation)
Gold plated RCA/Phono sockets and loudspeaker terminals
Outboard power supply included
Features
Small size allows easy placement
Pro-Ject Audio digital amplifiers achieve 80% energy efficiency
The Amp Box can be switched on & off remotely via a trigger signal. A 45cm long power-on cable is
supplied for this purpose
supplied for this purpose
For bi- ore tri amplification use, the remote power-on signal can be relayed to further units
Technical specifications
Power output:
2 x 20W/30W at 8 Ohm/4 Ohm (both channels driven)
Frequency response:
5Hz - 20kHz (+ 0dB, - 0,5dB)
Channel separation:
> 40dB at 20kHz
Noise floor:
> -100dB (A weighted)
THD:
< 0,05% at 10W
Gain: 22dB
Pre in:
Pre in:
1 pair RCA/Phono sockets
Input sensitivity:
1V
Input impedance:
47kohm
Speaker connectors:
4mm ∅ banana plugs, spade connectors or naked wire
Trigger:
12V DC switching voltage
Trigger in and out:
2-pole co-axial ∅ 2,5mm jack
Outboard power supply: 20V/3A DC (peak 7A DC), suitable for your country's mains supply
Power consumption:
Power consumption:
20V/3A DC
Dimension W x H x D:
103 x 38 x 141mm
Weight: 670g
without
power
supply
The manufacturer reserves the right to alter the technical specifications without notice.
Available in silver or black finish