Cisco CATALYST 6509 BUNDLE WITH 1300W AC POWER SUPPLY WITH FAN TRAY Техническое Руководство

Power Supply

Supports one or two power supplies. The following power supply
models are supported:

WS-CAC-1000W (1000 W AC-input power supply).

WS-CAC-1300W (1300 W AC-input power supply).

WS-CDC-1300W (1300 W DC-input power supply).

WS-CAC-2500W (2500 W AC-input power supply).

WS-CDC-2500W (2500 W DC-input power supply).

WS-CAC-3000W (3000 W AC-input power supply).

WS-CAC-4000W-US (4000 W AC-input power supply).

WS-CAC-4000W-INT (4000 W AC-input power supply).

PWR-4000-DC (4000 W DC-input power supply).

WS-CAC-6000W (6000 W AC-input power supply)

1

.

Installed power supplies can be of different wattage ratings. Installed
power supplies can also be both AC-input, both DC-input, or one
AC-input and one DC-input. Power supplies can be configured in either
redundant or non-redundant mode.

All Catalyst 6500 series AC-input power supplies require single-phase
source AC. Source AC can be out of phase between multiple power
supplies or multiple AC-power plugs on the same power supply because
all AC power supply inputs are isolated.

Single power supplies are installed in the left power supply bay. The
second (redundant) power supply is installed in the right power supply
bay.

You must install a 2500 W or higher capacity power supply when using
the Supervisor Engine 32 or the Supervisor Engine 720 and the
high-speed fan tray.

1.

When installed in a Catalyst 6509 switch chassis, the 6000 W power supply has a maximum output of 4000 W.