Cisco PIX 501 3DES BUNDLE CHASSIS AND SOFTWARE 10U Техническое Руководство
2-7
Cisco PIX Security Appliance Hardware Installation Guide
78-15170-03
Chapter 2 PIX 501
Replacing a Lithium Battery
To replace the lithium battery, perform the following steps:
Step 1
Remove the chassis cover as described in the
.
Step 2
Use a flathead screwdriver to slide the battery out of the metal clip on the circuit board (see
).
Step 3
Place the used battery aside and replace it with a new battery. Install the new battery writing side up.
Step 4
The battery snaps into place as you slide it into the battery slot.
Step 5
Replace the chassis cover as described in the