SANUS VLF510 Benutzeranleitung

10

(3 in.)

 CAUTION: 

 Avoid potential injuries or property damage! Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 5.5 

mm (7/32 in.) diameter drill bit.

Improper use could reduce the holding power of the lag bolt. 

Ù DO NOT over-tighten the lag bolts [03].

 

Ù Tighten the lag bolts [03] only until the washers [04] are pulled firmly against the wall plate [01].

5.5 mm

(7/32 in.)

 (1/2 in.)