ClearView WIFI-PTZ-NV Benutzeranleitung

 

 

i 

Thank you for purchasing our network camera! 

This quick start guide is designed to be a reference tool for your system.  

Please keep this start guide well for future reference. 

Please open the accessory bag to check the items one by one in accordance with the list below. 

Contact your local retailer ASAP if something is missing or damaged in the bag. 

᧪

᧪Electrical safety 

All installation and operation here should conform to your local electrical safety codes.  

Please check if the power supply is correct before operating the device.  

The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited 

power source is rated 12V DC, DC5V or AC24V in the IEC60950-1. (Power supply requirement is 

subject to the device label).   

Please install easy-to-use device for power off before installing wiring, which is for emergent power off 

when necessary.  

Please prevent the line cord from being trampled or pressed, especially the plug, power socket and the 

junction from the device.  

We assume no liability or responsibility for all the fires or electrical shock caused by improper handling 

or installation.  

We are not liable for any problems caused by unauthorized modification or attempted repair. 

 

᧪Environment 

Please don’t aim the device at strong light (such as lighting, sunlight and so on) to focus; otherwise it 

may cause overexposure (It is not the device malfunction), which will affect the longevity of CCD or 

CMOS. 

Please transport, use and store the device within the range of allowed humidity and temperature.  

Please don’t keep the device in a place which is wet, dusty, extremely hot, and extremely cold and with 

strong electromagnetic radiation or unstable lighting.  

Please do not allow water and other liquid falling into the camera in case that the internal components 

are damaged.  

Please do not allow rain or damp to the indoor device in case fire or lightning may occur.  

Please keep the sound ventilation in case of heat accumulation. 

Please pack the device with standard factory packaging or material with same quality when transporting 

the device.  

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and 

installation. 

 
3. Operation and Daily Maintenance