Kenwood DDX375BT Benutzeranleitung
![Kenwood](https://files.manualsbrain.com/attachments/ac42daf651911f04136b4d8c05616678159c5c55/common/fit/150/50/30f9cfad5dc0dc630b5170bf40a934a632113bd8a7d6531073899a1c1c4c/brand_logo.png)
Settings
Settings
<Smartphone Setup>
Specify the connection method of Android/iPod/
iPhone.
iPhone.
1
Select the device type (
1
), then touch
[Change] (
2
).
Initial Information
Device Type Select
Device Type
Device Name
iPod / iPhone
Android / Other
Change
Connection Type
iPod / iPhone
Device Name
Bluetooth
Smartphone Setup
2
Select the connection method (
1
), then
confirm the selection ([OK] or [Next]) (
2
).
If [iPod/iPhone] is selected in step 1:
USB 1 Wire
Bluetooth
OK
Smartphone Setup
<Bluetooth Setup>
Configure settings for using a Bluetooth device, such
as connection and other general operations. For
details, see “Bluetooth settings” on page 39.
as connection and other general operations. For
details, see “Bluetooth settings” on page 39.
<OEM Setup>
(Only for
DDX395/DDX375BT)
Get information, and change the settings for using the
ADS adapter.
ADS adapter.
<Beep>
• ON (Initial): Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
• OFF: Deactivates the key-touch tone.
<SETUP Memory>
Memorize, recall, or clear the settings you have made.
• The memorized settings are kept even when the unit
• The memorized settings are kept even when the unit
is reset.
Touch [Yes] to display the setting screen, then select
an operation:
• Recall: Recalls the memorized settings.
• Memory: Memorizes the current settings.
• Clear: Clears the currently memorized settings.
• Cancel: Cancels.
an operation:
• Recall: Recalls the memorized settings.
• Memory: Memorizes the current settings.
• Clear: Clears the currently memorized settings.
• Cancel: Cancels.
A confirmation message appears. Touch [Yes].
[USB 1 Wire]
Select this when the device is
connected via the USB input
terminal (cable from the rear
panel).
connected via the USB input
terminal (cable from the rear
panel).
[Bluetooth]
Select this when the device is
connected via Bluetooth. (Go to
step 3.)
connected via Bluetooth. (Go to
step 3.)
If [Android/Other] is selected in step 1:
Bluetooth
Next
Smartphone Setup
The <Paired Device List> screen appears. Go to
step 3.
step 3.
3
When selecting [Bluetooth] as the
connection method: Select the device (
connection method: Select the device (
1
),
then press [OK] (
2
) to connect.
• If the device is already connected, skip step
1.
Device Name 1
Device Name 5
Device Name 4
Device Name 3
Device Name 2
Remove
Connection
OK
Paired Device List
46
ENGLISH
EN_DDX2018ST_KR.indb 46
2017/05/17 9:28