Sony CDX-G1200U Benutzeranleitung

Seite von 29
21
GB
Cautions
• Run all ground (earth) leads to a 
common ground (earth) point.
• Do not get the leads trapped under a 
screw, or caught in moving parts (e.g., seat 
railing).
• Before making connections, turn the car 
ignition off to avoid short circuits.
• Connect  the  yellow and red power supply 
leads only after all other leads have been 
connected.
• Be sure to insulate any loose unconnected 
leads with electrical tape for safety.
• Choose the installation location carefully so 
that the unit will not interfere with normal 
driving operations.
• Avoid installing the unit in areas subject to 
dust, dirt, excessive vibration, or high 
temperature, such as in direct sunlight or 
near heater ducts.
• Use only the supplied mounting hardware 
for a safe and secure installation.
Note on the power supply lead (yellow)
When connecting this unit in combination with 
other stereo components, the amperage rating of 
the car circuit to which the unit is connected must 
be higher than the sum of each component’s fuse 
amperage rating.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Parts List for Installation
• This parts list does not include all the 
package contents.
• The  bracket 
 and the protection collar  
are attached to the unit before shipping. 
Before mounting the unit, use the release 
keys 
 to remove the bracket  from the 
• Keep the release keys 
 for future use as 
they are also necessary if you remove the 
unit from your car.
Connection/Installation
Precautions
× 4
5 × max. 8 mm
(
7
/
32
 × max. 
5
/
16
 in)
× 2