Alpine MRV-V500 Benutzeranleitung
11
-EN
SYSTEM DIAGRAMS
Front Speakers
Rear Speakers
Subwoofer
Head Unit, etc.
Front Output
Rear Speakers
Subwoofer
Head Unit, etc.
Front Output
Rear Output
Subwoofer Output
RCA Extension Cable (Sold Separately)
Y-Adapter (Sold Separately)
Subwoofer Output
RCA Extension Cable (Sold Separately)
Y-Adapter (Sold Separately)
TYPICAL SYSTEM CONNECTIONS
4 Speaker + 1 Subwoofer System (5-Channel Input)
Input Channel Selector Switch Setting
3/4
SUB W.
CH-3/4
SUB W.
White
Violet/Black
FR Gray/Black
RL Green
RL Green/Black
RR Violet
RR Violet/Black
White/Black
Violet
FR Gray
Gray
Green/Black
FL White/Black
Gray/Black
Green
FL White
Connecting to the Speaker Level Input System
1 For the “Speaker Level Input System” setting,
connecting the Remote Turn-On Lead is not
required due to the “REMOTE SENSING” function of
this product. However, the “REMOTE SENSING”
function may not work depending on the signal
source connected. In such a case, connect the
Remote Turn-On Lead to an incoming power
supply cord (accessory power) in the ACC position.
required due to the “REMOTE SENSING” function of
this product. However, the “REMOTE SENSING”
function may not work depending on the signal
source connected. In such a case, connect the
Remote Turn-On Lead to an incoming power
supply cord (accessory power) in the ACC position.
2 If connecting both Speaker Input Leads and RCA
Inputs at the same time, do not connect both
signals to the same input channel of the amplifier.
Instead, be sure to connect each pair of inputs to a
different Input channel pair.
signals to the same input channel of the amplifier.
Instead, be sure to connect each pair of inputs to a
different Input channel pair.
example;
Speaker Input Leads:
FL/FR to CH1/CH2, RL/RR to CH3/CH4
RCA
Inputs:
SUBWL/SUBWR to SUBWL/SUBWR
Fig. 10