Kicker Klock Werks® RVICXCT10 FIT KIT Benutzeranleitung

KLOCK WERKS | VICTORY CROSS COUNTRY KICKER INSTALLATION

GETTING STARTED |

*Please reference model appropriate service manual for procedures and torque speciﬁcations.

1. Protect painted surfaces with a soft cloth.

2. Remove upper and lower fasteners for inner chin fairing and disconnect battery (Pic 1 and 2)

HARNESS INSTALLATION

3. Follow proper procedure to remove side covers and seat (Pic 3)

4. Remove passenger backrest pad (Pic 4)

5. Remove speakers grilles

6. Remove

speakers

(Pic 5)

7. Remove speaker housings (Pic 6 & 7)

8. Unplug the 2-pin power connector on the new harness and set the piece with the fuse aside at this time.

9. From the inside-left of the trunk, thread the left side speaker wires, blue trigger wire and power leads through

the existing holes behind the left side speaker (Pic 8)

10. Route the power leads along the existing trunk harness and under the left side cover (Pic 9)

11. Route the blue trigger wire under the lower backrest area and connect it to the blue/pink wire with the barrel

connector. Activate the provided heat shrink over the connection to reduce the risk of a short. (Pic 10)

12. Route the right speaker wires along the ﬂoor of the trunk and through a hole behind the right speaker (Pic 11)