DJI Phantom 4 Advanced Quadcopter Benutzeranleitung
Aircraft
14
©
2017 DJI All Rights Reserved.
Phantom 4 Advanced / Advanced+ User Manual
The Front LEDs show the orientation of the aircraft. The Front LEDs glow solid red when the aircraft is
turned on to indicate the front (or nose) of the aircraft. The Aircraft Status Indicators communicate the
system status of the flight controller. Refer to the table below for more information about the Aircraft Status
Indicators.
Front LED
Aircraft Status Indicator
Aircraft Status Indicator Description
Normal
Alternate red, green and yellow flashing
Turning On and Self Diagnostic Testing
Alternate green and yellow flashing
Warming Up
Slow green flashing
P-mode with GPS
×2
Two green flashes
P-mode with Vision System
Slow yellow flashing
A-mode but No GPS or Vision System
Fast green flashing
Braking
Warning
Fast yellow flashing
Remote Controller Signal Lost
Slow red flashing
Low Battery Warning
Fast red flashing
Critical Battery Warning
Red flashing
IMU Error
— Solid Red
Critical Error
Alternate red and yellow flashing
Compass Calibration Required
Maneuvering the aircraft in A-mode can be difficult. Before switching the aircraft into A-mode, make
sure you are comfortable flying in this mode. DO NOT fly the aircraft too far away as you might lose
control and cause a potential hazard.
Avoid flying in areas where GPS signal is weak, or in confined spaces. The aircraft will otherwise
be forced to enter A-mode, leading to potential flight hazards, please land it in a safe place as
soon as possible.
Flight Status Indicator
The Phantom 4 Advanced / Advanced+ has Front LEDs and Aircraft Status Indicators. The positions of
these LEDs are shown in the figure below: