DJI Phantom 4 Advanced Quadcopter Benutzeranleitung

Remote Controller

Phantom 4 Advanced / Advanced+ User Manual

Status LED

Alarm

Remote Controller Status

— Solid Red

Chime

The remote controller is disconnected from the aircraft.

— Solid Green

Chime

The remote controller is connected to the aircraft.

Slow Blinking Red D-D-D......

Remote controller error.

Red and Green/ Red and

Yellow Alternate Blinks

None

HD downlink is disrupted.

RTH LED

Sound

Remote Controller Status

— Solid White

Chime

Aircraft is returning home.

Blinking White

D . . .

Sending Return-to-Home command to the aircraft.

Blinking White

DD .. .. ..

Return-to-Home procedure in progress.

The Remote Controller Status Indicator will blink red and sound an alert, when the battery level is

critically low.

Linking the Remote Controller

The remote controller is linked to your aircraft before delivery. Linking is only required when using a

new remote controller for the first time. Follow these steps to link a new remote controller:

1. Turn on the remote controller and connect to the mobile device. Launch the DJI GO 4 app.

2. Turn on the Intelligent Flight Battery.
3. Select GO FLY and tap on

and then tap “Linking RC” button as shown below.

RC Control Setting

RC Calibration

Stick Mode

Button Customization

Not Defined

Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.

Do not change unless familiar with your new mode.

You can customize the C1 and C2 buttons on the back of the RC.

Linking RC