DJI Phantom 4 Advanced Quadcopter Benutzeranleitung

Appendix

Phantom 4 Advanced / Advanced+ User Manual

Upgrading the Remote Controller Firmware

Method 1: Using the DJI GO 4 App

Power on the remote controller and connect it with the DJI GO 4 app. A prompt will appear if a new

firmware upgrade is available. To start upgrading, connect a mobile device to the Internet and follow the

on-screen instructions.

Method 2: Using a Micro SD Card (For Phantom 4 Advanced+ only)

1. Visit the official DJI website and go to the Phantom 4 Advanced / Advanced+ page, download the

latest firmware to a Micro SD card.

2. Insert the Micro SD card into the Micro SD card slot of the remote controller.

3. Power on the remote controller, enter System Settings > System Update, click Local Update on the

top-right corner. The latest firmware will show on the Micro SD card. Click Update to start upgrading.

The firmware update will take around 15 minutes. It is normal that the gimbal will go limp, the

aircraft status indicator blinks abnormally and the aircraft reboots. Wait patiently until the update

is complete.

Ensure the computer has access to the Internet.

Ensure the battery level is adequate for the Intelligent Flight Battery and the remote controller.

Do not disconnect the aircraft from the computer during firmware upgrade.

Please note that firmware update may reset various Main Controller Settings, such as the RTH

Altitude and Maximum Flight Distance, to factory defaults. Before the update, take note of your

preferred DJI GO 4 settings, and readjust them after the update to suit your preference.

Intelligent Flight Mode

Intelligent Flight mode includes Course Lock, Home Lock, Point of Interest (POI), Follow Me and

Waypoints features to assist users to capture professional shoots during the flight. Course Lock and

Home Point lock ensure the lock of aircraft orientation, sparing the user to focus more on other oper-

ations. Point of Interest, Follow Me and Waypoints mode enable aircraft to fly automatically according

to the pre-set flight maneuvers.

Course Lock

Lock the current nose direction as the aircraft’s forward direction. The aircraft will

move in the locked directions regardless of its orientation (yaw angle).

Home Lock

Pull the pitch stick backward to move the aircraft toward its recorded Home Point.

Point of Interest

The aircraft will orbit around the subject automatically to allow the operator to be

more focus on framing their shoot on the subject in Point of Interest.

Follow Me

A virtual tether is created between the aircraft and the mobile device so that the

aircraft can track your movement as you move. Note that Follow Me performance is

subject to the GPS accuracy on the mobile device.

Waypoints

Record a flight path, then the aircraft will fly along the same path repeatedly while
you control the camera and orientation. The flight path can be saved and re-apply in
the future.