Paradigm PW 600 Benutzeranleitung

Power Button (    ): 

• Press    to power on/off. If no signal is 

received for 20 minutes, unit will be in 
standby.

• Press    to reboot (power cycle) or 

Factory Reset your Paradigm product  
(see page 16).

• Press   to increase the volume level. 

Press   to decrease the volume level. 

•  Press and hold either   /   to ramp the 

volume level up or down. 

Mute Button (  ): 

• Press    to mute the audio. The Mute 

button (  ) will illuminate WHITE when 
the mute function is active. 

•  The Mute Button (  ) also switches on/

off ARC

™

 Settings

–  To setup ARC

™ 

 and to learn how it 

corrects room deficiencies see page 
15.

–  To switch off ARC

™

 settings: PRESS 

and HOLD    for 5 seconds. Upon 
releasing the button, a “negative tone” 
will sound verifying ARC

™ 

settings are 

switched off. 

–  Repeat the process to switch on ARC

™

 

settings. You will hear a “positive tone” 
when ARC

™

 settings are switched on.

 ): 

•  PRESS and RELEASE  

  to toggle 

between Wireless/Wired Network 
Streaming Mode AND Rear Input Mode. 

•  The Input button ( 

 ) illuminates WHITE 

when Wireless/Wired Network Streaming 
Mode is enabled and BLUE when the 
Rear Input Mode is enabled.

•  Your Paradigm product has the following  

rear input: 3.5 mm Analog Input (PW 800 
and PW 600) OR RCA Analog Input (PW 
AMP). 

•  Wireless/Wired Network Streaming 

Mode is the default input mode. If your 
Paradigm product is set to Rear Input 
Mode and music is streamed, by default 
your Paradigm product will switch to 
Wireless/Wired Network Streaming 
Mode.

•  Enable/disable Auto input Mode  

Wi-Fi Setup Button: 

•  Initiates Wi-Fi setup for both Wi-Fi 

Protected Setup (WPS)  
and Standard Wi-Fi Setup.

Stereo/Mono Setting Switch (L/S/R)  
(PW 600 ONLY): 

•  For stereo output from one PW 600 

speaker, set the switch to the “S” 
(Stereo) position. For a stereo pair, set 
the switch to either “L” (Left) or “R” 
(Right) depending on the position of your 
speaker within a listening space. For 
example: If your speaker is in the left 
position within a listening space, set the 
switch to the “L” (Left) position. Follow 
app instructions for pairing with iOS/
Android apps.

 ):

The Wi-Fi Indicator 

( 

 )

 tells you what your 

Paradigm product is doing:

• Fast Blinking – Your Paradigm  

product is booting up.

• Blinking – Your Paradigm product is 

attempting to connect to a wireless 
router.

•  Slow Pulse – Setup Mode.

•  Two Blinks > Pause – WPS Mode.

• Solid – Connected to router.

• Off – Connected to a router  

using a wired connection.

8