Sony HT-CT800 Benutzeranleitung
70
US
The wireless speakers cannot be
connected to the system.
connected to the system.
Update the software version of the
system and wireless speakers to the
latest version.
latest version.
The wireless surround function
cannot be used on SongPal.
cannot be used on SongPal.
Connect the mobile device to the
same network as that of the system
and wireless speakers.
and wireless speakers.
Use SongPal of the latest version.
The sound is delayed behind the
picture.
picture.
When the sound of the [TV], [HDMI1],
[HDMI2], [HDMI3], or [Analog] input is
played in the wireless multi room
function, the sound is delayed behind
the picture. This function is for
enjoying the sound of the device that
is connected to the system in
different rooms. If you are bothered
by a time gap between the sound and
picture, cancel the wireless multi
room function.
played in the wireless multi room
function, the sound is delayed behind
the picture. This function is for
enjoying the sound of the device that
is connected to the system in
different rooms. If you are bothered
by a time gap between the sound and
picture, cancel the wireless multi
room function.
The wireless multi room function
cannot be used on SongPal.
cannot be used on SongPal.
Connect the mobile device to the
same network as that of the system.
The remote control of this system
does not function.
does not function.
Point the remote control at the
remote control sensor on the main
unit (page 10).
unit (page 10).
Remove any obstacles in the path
between the remote control and the
system.
system.
Replace both batteries in the remote
control with new ones, if they are
weak.
weak.
Make sure you are pressing the
correct button on the remote control.
The Control for HDMI function does
not work properly.
not work properly.
Check the connection with the
system (refer to the supplied Startup
Guide).
Guide).
Enable the Control for HDMI function
on the TV. For details, refer to the
operating instructions of your TV.
operating instructions of your TV.
Wait a while, and then try again. If
you unplug the system, it will take a
while before operations can be made.
Wait for 15 seconds or longer, and
then try again.
while before operations can be made.
Wait for 15 seconds or longer, and
then try again.
Make sure the devices connected to
the system support the Control for
HDMI function.
HDMI function.
Enable the Control for HDMI function
on the devices connected to the
system. For details, refer to the
operating instructions of your device.
system. For details, refer to the
operating instructions of your device.
The type and number of devices that
can be controlled by the Control for
HDMI function is restricted by the
HDMI CEC standard as follows:
– Recording devices (Blu-ray Disc
HDMI function is restricted by the
HDMI CEC standard as follows:
– Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up to
3 devices
3 devices
– Playback devices (Blu-ray Disc
player, DVD player, etc.): up to 3
devices (this system uses one of
them)
devices (this system uses one of
them)
– Tuner-related devices: up to 4
devices
– Audio system (receiver/
headphone): up to 1 device (used by
this system)
this system)
“PRTCT,” “PUSH” and “POWER”
flash alternately in the front panel
display.
flash alternately in the front panel
display.
Press (power) to turn off the
system. After the indicator
disappears, disconnect the AC power
cord (mains lead) and make sure
nothing is obstructing the ventilation
holes of the system.
disappears, disconnect the AC power
cord (mains lead) and make sure
nothing is obstructing the ventilation
holes of the system.
Wireless Multi Room
Remote Control
Others