MartinLogan Motion® Vision X Benutzeranleitung

19

Your soundbar features six buttons on top of the 
unit to control the following functions:

POWER: Turns the soundbar on. Press and 

hold for 2 seconds to turn the soundbar off (fig. 9).

PREVIOUS/NEXT INPUT: Cycles through the 
inputs. The order of inputs is: Digital Optical > Digital 
Coaxial > Left/Right Analog > Play-Fi (fig. 8).

VOL+/VOL–: Adjusts volume (fig. 8).

MUTE: When muted, the soundbar will display 
‘MUTE’. Pressing this button a second time or 
pressing either volume button will restore the previ-
ous volume setting (fig. 8).

Accessing the Menu: To access the menu, 
for 2 seconds press and hold the center button. 
After the menu is activated, the buttons will function 
as up/down/left/right/enter. Exit the menu by 
repeatedly pressing the left directional button (fig. 
9 and fig. 10).

Wi-Fi Setup and Status: For information on 
this button, please refer to the Play-Fi section of this 
manual (fig. 9).

If the DTS Play-Fi app on your mobile device or 
PC requires an update, you will be notified that an 
update is available and guided through the update 
process.

DTS PLAY-FI MODULE UPDATE
The DTS Play-Fi module within your speaker will 
occasionally require an update. If an update is 
needed, the DTS Play-Fi app will notify you and 
guide you through the update process.

SOUNDBAR FIRMWARE UPDATE
Your soundbar may occasionally require firmware 
updates. Please check www.martinlogan.com for 
the latest firmware updates.

REBOOTING YOUR SOUNDBAR
On the soundbar’s top control panel, press and 
release both the Next and Previous Input (< and >) 
buttons. Upon releasing the button, two tones will 
play and the soundbar will reboot. This reboot will 
cycle the power off and on and force the soundbar 
to reconnect to your network.