Atlas Sound Atlas FAP42TC Benutzeranleitung

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119  U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435

©2011 Atlas Sound L.P

. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P

. All other tradem

arks are property of their respective owners.      A

TS001871 RevD 8/11

Power Rating 

25 Watts

Transformer Taps 

1, 2, 4, 8, & 16 Watts & 8

1 Bypass

Frequency Response 

83Hz – 20kHz (±7dB)

Sensitivity (1W / 1M) 

88dB

Woofer 

4" Poly Cone with Butyl Rubber Surround

Woofer Magnet Weight  10oz (364g)

HF Driver 

Coaxially Mounted PEI Dome Tweeter

Diameter 10

1

⁄

2

" (267mm)

Overall Height 

4

1

⁄

4

" (108mm)

Enclosure Volume 

134 in

3

Cut-Out Diameter 

9" (229mm)

•

Low Depth (4") Speaker System for Limited Space Applications

•

Easy Installation in Drop Tile or Sheetrock Ceilings Via C-Ring / V-Rail 

Tile Bridge and "Dog Leg" Mounting System (Included) 

•

Front Mounted Tap Selector Switch for Easy System Tuning 

Adjustment Includes Transformer Bypass Setting for 8

Ω Direct 

Coupled Operation

•

"Press Fit" Grilles Blend Better into Contemporary Architecture

•

Enhanced Quality 70.7V / 100V Internal Transformers Minimize 

Insertion Loss and Maintan Low Frequency Response While 

Providing Increased Output for Higher SPL Applications

•

UL 1480 Listed

Atlas Sound’s FAP42TC combines superior coaxial loudspeaker perfor-

mance with wide dispersion and easy installation. A low profile enclosure 

and wide coverage make the FAP42TC a perfect choice for low ceilings. 

The FAP42TC will satisfy the needs of owners, architects, contractors, 

and consultants by delivering true, high fidelity sound reproduction in an 

attractive and easy-to-install system. The FAP42TC is ideal for high-intel-

ligibility voice, music, and signal reproduction in commercial, industrial, 

and institutional applications.

The FAP42TC's 130° dispersion angle effectively reduces the number of 

loudspeakers necessary to achieve coverage in distributed systems with 

low ceilings. 

The loudspeaker component matches the performance of the legendary 

Atlas Sound Strategy FA Series. High quality construction 4" coaxial cone 

type driver includes a 1" voice coil and polypropylene cone with a butyl 

rubber surround. The 19mm coaxially mounted tweeter is constructed 

of PEI. This loudspeaker is factory assembled in a deep drawn enclosure 

and includes a specially designed 16 watt low saturation, 70.7V / 100V 

transformer. A convenient front mounted selector switch allows tap 

selection without the need to remove the speaker from the ceiling. This 

switch also includes a transformer bypass setting for 8

Ω operation.