Polk Boom BOOM Swimmer Duo Benutzeranleitung

www.boommovement.com

Swimmer Owner’s Manual

Press and hold the power button until an audible cue is heard and a blue 

LED will begin to flash every two seconds to indicate that it’s powered on 

and searching for a device to pair with.

To turn off the Swimmer, press 

and hold the power button until an 

audible cue is heard. The Swimmer 

will power off.

Note: If the Swimmer is powered 

on, whether connected or not 

with no music playing, it will 

automatically turn off after eight 

minutes if the Bluetooth connection 

isn’t paired with a device.

If you have not connected to a device before, the Swimmer will 

automatically go into pairing mode as soon as it powers on. Go into your 

phone’s Bluetooth settings (make sure to enable Bluetooth as well) in 

order to connect the Swimmer to your device. 

Next, locate the Swimmer on your Bluetooth device list and select “Polk 

Boom Swimmer Duo” or “Polk Boom Swimmer Jr.” You will hear an 

audible cue that it has paired and the blue light will begin flashing every 

five seconds on your Swimmer.

Note: A battery icon also appears next to the Bluetooth icon at the top 

of your phone’s screen (if your OS supports this feature), indicating the 

Swimmer’s battery level.

On both Swimmer Duo’s press and hold the “Link” buttons 

simultaneously until an audible cue is heard from one or both Swimmer 

Duo’s (if one of the Swimmers is already connected to a BT source 

device, that Swimmer will not make an audible cue). They will sound 

separately to indicate that you’ve initiated linking mode. Another audible 

cue follows within 15 seconds from both speakers to indicate that your 

Swimmer Duo’s have linked together. 

Your parent speaker (left audio signal) is indicated by the blue light 

flashing every five seconds. Your child speaker (right audio signal) is 

indicated by the red/blue light flashing every five seconds. Together they 

work as true left and right stereo speakers, splitting the audio signal and 

doubling down on great sound wherever you go. 

Note: When stereo linked, you will still only pair to one speaker. As 

before, select Polk BOOM Swimmer Duo from your Bluetooth device 

list. This will connect you with the master speaker which will wirelessly 

broadcast the right signal to the child speaker.

Note: If you press and hold the “Link” button on either speaker for 

three seconds, your Swimmer Duos will unlink and music will only play 

through the parent speaker.

Note: If you power off one of your paired Swimmer Duo’s, they both 

turn off. If you power them back on within eight seconds of each other, 

they will automatically reconnect to your phone and remain in stereo 

linking mode. However, after eight seconds of one speaker being 

powered on while the other is off, stereo linking ends and you will have 

to re-link your Swimmer’s together.

Note: If you were previously stereo linked and by chance grabbed the 

child speaker for use as a mono speaker (on its own), you will need to 

go back into your Bluetooth settings to pair to that Swimmer.   

If you own a device that is not equipped with Bluetooth technology and 

you want to play sound from it, simply connect the included auxiliary 

cable from your device to the Line In input at the base of the Swimmer.

Note: If you’ve previously stereo linked your Swimmer Duo and then 

use the Line In to the parent speaker, music will automatically play 

from both speakers in true left / right stereo with the child speaker 

connected wirelessly.

Note: All settings can be adjusted through your phone, too.

Note: If stereo linked, all of the above controls on one Swimmer apply 

to both (for Swimmer Duo only).

If your Swimmer is paired to your phone and there’s an incoming call, 

your music will pause and a ringer will sound through the Swimmer. To 

answer a call, tap the + button. 

To end a call, press the - button. Remember, you can still adjust the 

volume on the Swimmer while you talk.

Swimmer Jr. 

Swimmer Duo 

Tap +/- buttons at same time

Tap + or – buttons

(audible cue sounds at max  

volume; mutes at lowest volume)

Hold + button for two seconds

Hold – button for two seconds. On some apps, 

this will first go to the beginning of a track. To 

go to the previous track, hold – button for two 

seconds when the track first begins to play.