Dbx dbx® 223xs Benutzeranleitung

223s, 223xs,
234s, 234xs

On the back panel of the 234s/234xs, there are markings to help you connect the source 
devices and amplifiers to your crossover. 

To operate the 234s in stereo 3-way application, follow the top row of markings horizontally 
along the length of the 234s. For stereo 2-way operation of the 234s, use the second row 
of markings above the connectors. For mono 4-way operation of the 234s, use the markings 
directly below the connectors. The connectors not used in the selected mode are marked “Not 
Used”. This designation applies only to that mode of operation.

To operate the 234xs in stereo 3-way application, use the first row of markings below the 
connectors. For stereo 2-way operation of the 234xs, use the second row of markings below 
the connectors. For mono 4-way operation of the 234s, use the markings directly above 
the connectors. The connectors not used in the selected mode are marked “Not Used”. This 
designation applies only to that mode of operation.

The 223s/223xs is marked in a similar way: for stereo 2-way operation use the markings above 
the connectors. To operate the 223s/223xs in mono 3-way mode use the markings below the 
connectors. The connectors which are not used in the selected mode are marked “not used”. 
This designation applies only to that mode of operation.

s

source.

s

234s/234xs or 223s/223xs is turned off. Connect the output(s) of the source device to the 
inputs of the crossover, following the rear panel markings carefully. 

s

off. Using the back panel markings as a guide, use high quality cables to connect the ampli-
fiers to the appropriate outputs of the 234s/234xs or 223s/223xs.

Section 3

Rear Panel Operations