BOSS MR752UAB Benutzeranleitung
6
interval of checking time of each AFs depends on the signal strength of current station, from a few minute
for strong station to a few seconds for weak station. Every time that new AF is stronger than current
station, it switches over to that frequency for very short time, and NEW FREQUENCY is displayed for 1-2
second. Because the mute time of AF switching or checking time is very short, it is almost inaudible in
case of normal program. (When AF flashes on LCD, it will search for RDS station. If AF and TP flash on
LCD, it can only search for traffic announcement station) .
for strong station to a few seconds for weak station. Every time that new AF is stronger than current
station, it switches over to that frequency for very short time, and NEW FREQUENCY is displayed for 1-2
second. Because the mute time of AF switching or checking time is very short, it is almost inaudible in
case of normal program. (When AF flashes on LCD, it will search for RDS station. If AF and TP flash on
LCD, it can only search for traffic announcement station) .
During FM mode, when AF is on, SEEK, (SCAN), AUTOMEMORY function can only receive and save
RDS program.
RDS program.
7. TA [TRAFFIC ANNOUNCEMENT]
Press SEL button and hold for about 1 second to turn on MENU mode, then press SEL button repeatedly
to select AF mode, rotate the VOL knob to select TA ON, then TA flash in display.
A) When TA mode is on(TA is displayed on LCD), it will begin to seek TA station and TA SEEK will be
displayed on LCD for a while.
When traffic announcement is transmitted:
1) If the unit is in SD, USB or disc mode, it will switch to radio mode temporarily.
2) Temporarily switch over to an EON linked station when EON detects a traffic announcement on
that other program, and TP will be displayed on LCD.
3) If volume level is below 20, volume level is raised to 20, and returns to its previous mode and
volume level when the traffic announcement is over.
If volume is adjusted during traffic announcement, only the traffic announcement volume is valid.
* TA interruption function:
Press SEL button and hold for about 1 second to turn on MENU mode, then press SEL button repeatedly
to select AF mode, rotate the VOL knob to select TA ON, then TA flash in display.
A) When TA mode is on(TA is displayed on LCD), it will begin to seek TA station and TA SEEK will be
displayed on LCD for a while.
When traffic announcement is transmitted:
1) If the unit is in SD, USB or disc mode, it will switch to radio mode temporarily.
2) Temporarily switch over to an EON linked station when EON detects a traffic announcement on
that other program, and TP will be displayed on LCD.
3) If volume level is below 20, volume level is raised to 20, and returns to its previous mode and
volume level when the traffic announcement is over.
If volume is adjusted during traffic announcement, only the traffic announcement volume is valid.
* TA interruption function:
The current traffic announcement is cancelled by pressing this key. But the TA mode will not be off.
* When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when
traffic program identification code has been received.
traffic program identification code has been received.
USB or Disc Operation:
1. To load/unload disc
Press the REL button to flip down the front panel and then insert the disc into the disc slot or press
the EJ button to eject the disc.
2. To load/unload SD card or USB
When playing SD or USB, insert the SD card or USB stick into SD slot or USB port. Then the playing
mode will be changed into SD or USB mode and display CARD or USB on LCD(When SD card and USB
stick are both inserted into their slot or port, the playing mode will be changed into the mode of the later
one), and then play the first track of SD or USB. When needing pull out the SD card, firstly press MMC/SD
card once, then pull it out.
3. To select next or previous track to play
Press the >>| button to play the next track.
Press the |<< button to play the current track from the beginning of the current track.
4. To select next or previous 10 track to play
Press the REL button to flip down the front panel and then insert the disc into the disc slot or press
the EJ button to eject the disc.
2. To load/unload SD card or USB
When playing SD or USB, insert the SD card or USB stick into SD slot or USB port. Then the playing
mode will be changed into SD or USB mode and display CARD or USB on LCD(When SD card and USB
stick are both inserted into their slot or port, the playing mode will be changed into the mode of the later
one), and then play the first track of SD or USB. When needing pull out the SD card, firstly press MMC/SD
card once, then pull it out.
3. To select next or previous track to play
Press the >>| button to play the next track.
Press the |<< button to play the current track from the beginning of the current track.
4. To select next or previous 10 track to play
In SD, USB or MP3/WMA disc playback mode, press the 6 or the 5 button to move up or down 10
tracks at a time.
When the remained total track is less than 10, the both buttons are inactive.
When the remained total track is less than 10, the both buttons are inactive.
5. To play fast forward or backward
During normal playback, press >>| or |<< button and hold to skip forward or backward.
Release to resume normal playback
6. How to use the PLAY/PAUSE/TOP button
During playback, press 1/>|| button to pause SD, USB or Disc playback.
Press again to resume MMC/SD, USB or Disc playback.
During normal playback, press >>| or |<< button and hold to skip forward or backward.
Release to resume normal playback
6. How to use the PLAY/PAUSE/TOP button
During playback, press 1/>|| button to pause SD, USB or Disc playback.
Press again to resume MMC/SD, USB or Disc playback.