Yamaha R-N803 Benutzeranleitung

■

Updates the firmware via the network.

Configures the Bluetooth settings.

■

Enables/disables the Bluetooth function (p. 32).

■

Standby (Bluetooth Standby)

Selects whether to enable/disable the function that turns 
on the unit from Bluetooth devices (Bluetooth standby). If 
this function is set to “On”, the unit automatically turns on 
when a connect operation (p. 32) is performed on the 
Bluetooth device.

This setting is not available when “Standby (Network Standby)” 
(p. 49) is set to “Off”.

Configures the setting related to YPAO.
The following settings are available for each speaker 
system (Speaker A, Speaker B, Speaker A+B).

The corresponding speaker system and following settings will be 
selectable after the YPAO measurement result is saved.

■

Enables/disables the reflection of the YPAO measurement.

■

Enables/disables the YPAO volume function. When the 
YPAO Volume function is enabled, the high- and low-
frequency levels are automatically adjusted according to 
the volume so that you can enjoy natural sounds even at 
low volume.

• The YPAO Volume function is disabled when “YPAO On/Off” 

is set to “Off”.

• When the YPAO volume function is enabled, the YPAO VOL. 

indicator on the front display lights up.

• The LOUDNESS control (p. 24) does not function when the 

YPAO Volume function is enabled.

Configures the volume-related settings.

■

Sets the maximum volume to prevent excessive loudness.

Setting range
-30 dB to +15.0 dB / +16.5 dB (5 dB step)

Default
+16.5 dB

■

Sets the initial volume when the receiver is turned on.

Setting range
Off, Mute, -80.0 dB to +16.5 dB (0.5 dB Step)

Default
Off

Starts the process to update the unit’s firmware. 
For details, see “Updating the unit’s firmware via 
the network” (p. 54).

Displays the version of the firmware installed on 
the unit.

Displays the system ID number.

Disables the Bluetooth function.

Enables the Bluetooth function. Immediately 
after selecting the “On”, output of the network 
source is paused.

Disables the Bluetooth standby function.

Enables the Bluetooth standby function. (The 
unit consumes more power than when “Off” is 
selected.)

Disables the reflection of the YPAO measurement.

Enables the reflection of the YPAO measurement.

Disables the YPAO Volume function.

Enables the YPAO Volume function.