ONKYO PR-RZ5100 Benutzeranleitung

Troubleshooting | Appendix

RDS stands for Radio Data System and is a method of 

transmitting data in FM radio signals. In regions using 

RDS, the radio station name is displayed when you tune 

into a radio station broadcasting program information. 

When you press   on the remote controller in this state, 

you can use the following functions.

■ Display text information (Radio Text)

1.  While the name of the station is being displayed on the 

display, press   on the remote controller once.

Radio Text (RT) broadcast by the station is displayed 

scrolling across the display. "No Text Data" is displayed 

when no text information is available.

•  Unusual characters may be displayed when the unit 

receives unsupported characters. However, this is not 

a malfunction. Also, if the signal from a station is weak, 

information may not be displayed.

■ Search for stations by Program Type

1.  While the name of the station is being displayed on the 

display, press   on the remote controller twice.

2.  Press the cursors  /  on the remote controller to 

select the Program Type you want to find, then press 

ENTER to start the search.

The Program Types displayed are as follows:

None

News (News reports)

Affairs (Current affairs)

Info (Information)

Sport

Educate (Education)

Drama

Culture

Science (Science and technology)

Varied

Pop M (Pop music)

Rock M (Rock music)

Easy M (Middle of the road music)

Light M (Light classics)

Classics (Serious classics)

Other M (Other music)

Weather

Finance

Children (Children's programmes)

Social (Social affairs)

Religion

Phone In

Travel

Leisure

Jazz (Jazz music)

Country (Country music)

Nation M (National music)

Oldies (Oldies music)

Folk M (Folk music)

Document (Documentary)

•  The information displayed may sometimes not 

match the content being broadcast by the station.

3.  When a station is found, the station flashes on the 

display. Press ENTER while this is happening to start 

receiving that station. If you don't press ENTER, the unit 

continues to search for another station.

•  If no stations are found, the message "Not Found" is 

displayed.

•  Unusual characters may be displayed when the unit 

receives unsupported characters. However, this is 

not a malfunction. Also, if the signal from a station is 

weak, information may not be displayed.