Monitor Audio CT265-IDC Benutzeranleitung

Prior to Fitting the Custom Install Series Speakers 

CAUTION:  These Custom Install loudspeakers can only be fixed into plasterboard (dry-lined) or suspended 
ceilings/ walls with a thickness of up to 45mm (1 

3/4

”).  Solid wall installation will require channeling out and frame 

work constructed

®

 dog legs to clamp to. For safety reasons, if you are unsure 

of your ability to provide a secure and safe fixing, do not attempt to fix these speakers, please obtain the services 
of a competent and qualified trades person.

CAUTION:  Ensure that there are no water pipes or electricity cables running within the wall structure before cutting 
the speaker apertures.  Work from secure steps and avoid trailing wires.

Over Tightening Warning

Do not over-tighten the Tri-Grip Dog Leg clamps.  Over tightening the clamping mechanism on any in ceiling/ in wall speaker 
can result in damage to the speaker mounting hardware, ceiling/ wall or speaker frame, and/ or deflection in the speaker 
frame during installation.

If you notice any of the above during installation, you have overtightened the Tri Grip 

DoG leg.  Back off the mounting screw 

until deflection is reduced to allow the product to sit firmly against the ceiling / wall. 

When are using a cordless screwdriver/ drill to install this product ensure the clutch is set to it’s lowest setting to avoid from 
over-tightening and damaging the mounting hardware.