Sony HT-MT300 Benutzeranleitung
31
US
Addit
ional I
n
fo
rm
at
ion
at
ion
Specifications
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels
driven, from 200 - 20,000 Hz; rated
15 W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250 mW to
rated output.
driven, from 200 - 20,000 Hz; rated
15 W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250 mW to
rated output.
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 25 W
(per channel at 4 ohms, 1 kHz)
(per channel at 4 ohms, 1 kHz)
Canadian models:
POWER OUTPUT (rated)
POWER OUTPUT (rated)
Front L + Front R: 20 W + 20 W
(at 4 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 25 W
(per channel at 4 ohms, 1 kHz)
(per channel at 4 ohms, 1 kHz)
Inputs
USB
ANALOG IN
TV IN (OPTICAL)
USB section
(USB) port:
Type A (For connecting USB memory)
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.2
Output
BLUETOOTH Specification Power
Class 1
Class 1
Maximum communication range
Line of sight approx. 25 m
1)
Frequency band
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP 1.2 (Advanced Audio Distribution
Profile)
Profile)
AVRCP 1.6 (Audio Video Remote
Control Profile)
Control Profile)
Supported Codecs
3)
SBC
4)
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency
32 kHz, 44.1 kHz, 48 kHz)
32 kHz, 44.1 kHz, 48 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
conversion format
4)
Abbreviation for Subband Codec
Front L/Front R speaker block section
Speaker system
Full range speaker system, Acoustic
suspension
suspension
Speaker
40 mm × 100 mm (1 5/8 in × 4 in) cone
type
type
General
Power requirements
DC 19.5 V (using the supplied AC
adapter connected to AC 100 V - 240 V,
50 Hz/60Hz power supply)
adapter connected to AC 100 V - 240 V,
50 Hz/60Hz power supply)
Power consumption
On: 25 W
Standby mode: 0.5 W or less
BLUETOOTH Standby mode is set to
on: 1.8 W or less*
on: 1.8 W or less*
BLUETOOTH Standby mode is set to
off: 0.5 W or less
off: 0.5 W or less
* The system will automatically enter
Power saving mode when there is no
BLUETOOTH pairing history, even if
the BLUETOOTH standby mode is set
to on.
BLUETOOTH pairing history, even if
the BLUETOOTH standby mode is set
to on.
Dimensions* (approx.) (w/h/d)
500 mm × 54 mm × 103 mm
(19 3/4 in x 2 1/4 in x 4 1/8 in)
* Not including projection portion
Mass (approx.)
1.4 kg (3 lb 1 3/8 oz)
Additional Information
Bar Speaker (SA-MT300)