Yamaha CD-S3000 Benutzeranleitung

■ Program playback

In the program playback mode, you can play back tracks 
in a programmed sequence. 

• This operation is ineffective for MP3 or WMA discs.
• The programmed tracks are erased in the following cases:

– when the disc is ejected
– when this unit is turned off or goes to STANDBY mode
– when an audio source other than the disc is selected
– when the playback layer of a hybrid Super Audio CD is 

switched between SA-CD and CD

Press PROGRAM while playback is stopped.
This unit is set to the program editing mode.

Repeat step 2 to program the next track.
You can program up to 24 tracks.

Press the p (Play) key.
Playback starts from the beginning of the 
programmed sequence.

■ Setting the DPLL (Digital Phased Lock 

The audio DAC (ES9018) of this unit employs DPLL to 
generate accurate clock signals synchronized with the 
clock of the input digital audio signal. The 7-step DPLL 
bandwidth setting gives the unit tolerance for fluctuation 
of the clock of the input digital signal and adjustment of 
the accuracy of the operating clock in the DAC.

Press SOURCE to select the audio source to 
be played back.
The DPLL bandwidth can be set for each audio 
source, respectively.

Within 5 seconds after selecting the audio 
source, press ENTER.
The unit enters the setting mode, and the DPLL 
bandwidth currently set appears on the information 
display.

Each time the 

 (pause) key is pressed, the 

bandwidth changes in the following order. If you 
press the 

 (stop) key, it changes in reverse order.

(default)