Misc ION Betriebsanweisung

For Macintosh® Users: 

I  receive  an  error  message  when  I 
am  installing  the  ION®  Digital  Camera 
Driver. 

All  the  images  I  have  taken  do  not 
appear on the ION® Digital Camera. 

LCD display is flashing.

I cannot run the ION® Digital Camera .

I  hear  a  low  “beep”  when  trying  to 
take an image.

Shut  down  all  other  applications  and  attempt  to  re-
install the driver, or download the updated driver from 
www.ion-camera.com and install the updated driver.

Upload  all  images  to  your  Mac  as  soon  as  possible. 
(please  refer  to  Battery  Guidance  section  in  User’s 
Manual.)

If you need to change batteries, and retain the images 
in your ION® Digital Camera’s memory, ensure you are 
connected  to  a  Mac  which  is  turned  on  via  the  USB 
cable, which will then draw power from the Mac whilst 
you insert fresh batteries.

Check all cables connections are secured.

Upload saved images immediately, then replace battery.

Take your images in better light condition.

Check your lens cover is open.

If you have any other camera installed on your computer, 
remove the camera and it’s driver completely from your 
system  to  avoid  conflict  with  another  camera  or 
capture device.

ION®  Digital  Camera  Driver  does 
not load.

You have lost power to your ION® Digital Camera by either:

Insufficient battery power

Battery  power  is  too  low  to  continue 
taking images.

Connection failure

Removing  the  battery  without  being 
connected  to  your  Mac  (turned  on)  via 
the USB cable.

Conflict  with  another  camera  driver 
capture device.

Insufficient light.

Make  sure  you  slide  the  lens  cover  to  the  desired 
position.

Lost corner of images.

Black  corner  appears  on  the  images 
taken.

I cannot upload images to the Mac