Sony E 10-18 mm f/ 4 OSS Lens Handbuch

SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)

Adhesive bond (B-40):  J-6082-614-A

1.

Adjust to be in phase the fixed barrel and the zoom cam ring as shown in the picture(Fig.a).

2.

Engage the projection A of the 3-4 moving frame assy with the groove A on the fixed barrel.

3.

While keeping the position three screw holes on the 3-4 moving frame assy are seen through the grooves on the zoom cam ring,

install the three 3rd lens block 1 guide rollers, then slide first cam barrel the position as shown in the figure.

4.

Shorten the whole block and install three 3rd lens block 2 guide rollers.

5.

Apply the adhesive bond (B-40) to about two threads from the tips of stopper screws and tighten them.

3-4 Moving Frame Assy

3-4 Moving
Frame Assy

Fixed Barrel

Install with setting the projection A away
from the projection B.

Zoom Cam Ring

Projection A

Groove A

Projection B

Projection A

Groove A

(Fig.a)

3-4 Moving
Frame Assy

Screw Holes

3rd Lens Block
1 Guide Roller

First Cam Barrel

First Cam Barrel

Zoom Cam Ring

Apply the adhesive 
bond (B-40)

Apply the adhesive 
bond (B-40)

Apply the adhesive 
bond (B-40)

3rd Lens Block
1 Guide Roller

3rd Lens Block
1 Guide Roller

3rd Lens Block 2
Guide Roller

Screw Hole of
the 1st Lens Block
Guide Barrel