Sony E 10-18 mm f/ 4 OSS Lens Handbuch

SAL1870 (3.5-5.6/18-70) (DT 18-70mm F3.5-5.6)

1.

Attach the light shield plate to the rear component lens block as shown in the figure.

2.

Turn the light shield plate, and match the hole of light shield plate to the length groove part of rear component lens block.

3.

Insert the rear component lens block into the joint tube block to the end.

Keep the lever lowered, and insert the rear component lens block as shown in the figure.

Hole

Lever

Length groove

Light Shield Plate

Rear Component Lens Block

Main Flexible Block

Joint Tube Block