Samyang 7.5 mm f/ 3.5 UMC Fish-eye MFT Lens Gebrauchsanleitung

•

A

ttaching the lens

- Remove the front cap and the rear cap of the lens.

- 

Align 

the mount index (red 

dot) indicated on the lens, to the lens

mount index (white dot) indicated on the camera mount, then rotate

the lens clockwise until a clicking sound occurs.

•

Detaching the lens

- 

With

 the camera lens detaching button pressed, detach the lens by

rotating it counterclockwise until the lens stops.

• 

The hood blocks unnecessary light and protects the front surface of the 

   

lens from rain, snow, and dust. 

• 

Align the reference point marked on the hood with the reference point 

   

marked on the lens, then turn the hood clockwise until a clicking sound 

   

signals that the hood is fixed.

• Set the AF/MF conversion switch to the “AF” 

   

mode for autofocus operation.

• If you wish to use manual focus, set the AF/MF 

   

conversion switch to “MF”, 

   

which will allow you to adjust the focus 

   

manually using the focus ring. 

Class B equipment: Korean Class B ITE

This equipment has been registered with electromagnetic compatibility for

household purposes and can be used in residential areas, as well as all

other areas.

Model name

AF 85mm F1.4 EF

Aperture range

F

1.4 ~ 16

Angle of View

Full Frame 

ame

28.4

˚

APS-C

19.0

˚

Optical construction

9 elements in 7 groups 

(including 1 aspheric lenses)

Minimum focusing distance

0

.9

0

m

 (

2

.9

5

ft

)

Maximum shooting magnification

x 0.11

Filter size

㱪G

77.0 mm

Number of aperture blades

9

Maximum diameter X length

㱪G

88.0mm x 72.0mm

Weight

(excluding hood and cap)

485 g 

- The minimum focus is the distance from the image sensor to the object

.

- The product specifications and exterior are subject to change without notice.

Hood locking tube               

Focus ring

Mount                                    

AF/MF conversion switch

Lens mount index

Lens signal contact

• A filter can be mounted on the filter mounting screw at the front of the lens.

  - Only one filter should be mounted at one time.

  - If two or more filters are mounted at the same time, vignetting may occur.

  - Check that the filter size is compatible with the lens (refer to “Product 

  

  

specifications”) and then mount it at the front of the lens.

Hood point