BAE Systems L1FCGX-LF Benutzerhandbuch
First InterComm
™
System Installation Guide
Page 6
A29799
November 2007
3.2 Tools and Test Equipment
Table 4 lists details of the test equipment and software required to install the FICS.
These comprise:
These comprise:
•
A laptop computer equipped with WiFi capability, loaded with Windows® XP
1
Operating System, Service Pack 2, and FICS installer software (required to upload
user-specific parameters into the VCA100). The laptop is also used to test the FICS
after installation.
user-specific parameters into the VCA100). The laptop is also used to test the FICS
after installation.
•
A watt meter to test any antenna cables terminated by the installer.
•
A volt/ohmmeter to perform voltage and resistance checks.
Table 5 lists recommended tools for the First InterComm installation. Equivalent
substitutes may be used as necessary.
Table 4. Required Test Equipment and Software
Description
Part Number
Vendor
Quantity
Laptop PC with Windows XP, Service Pack 2
Varies
Varies
1
Buffalo 2.4 GHz Wireless Network Card
WLI-CB-G54HP
Buffalo Technology
1
BAE Systems First InterComm Installer’s CD
TBD
BAE Systems
1
Voltage/Resistance Meter (DVM or VOM)
Varies
Varies
1
Watt Meter w/ cables and adapters
Varies
Varies
1
Table 5. Recommended Tools for First InterComm Installation
Tool
Model/Specification
Screwdrivers, Phillips Head
#1 and #2
Non-insulated Crimp Tool
Thomas & Betts WT-111-M
Crimp Tool, Ratcheting Coaxial
Cambridge 24-9960P
Hole Saw, 3/4-inch with depth protection
Ripley HSK 19 or Antenex® HS34
Non-Metallic Fish Tape
Klein-Lite® 50156, 25 feet
Clutch-type Screw Gun
Makita® #6096DWE, #1 and #2 Phillips-Head bits
Pliers Slip
Jaw
Electric Drill
3/8-inch, with HSS bits
De-Burring Tool
Socket Set
Quarter Inch
Wire Cutters
Flush-cut and large
RF Cable Termination Kit
For SMA and TNC connectors
Heat Gun
1
Windows is a registered trademark of Microsoft Corporation