Shenyang Torch-Bigtide Digital Technology Co. Ltd. 19LCD1928M Benutzerhandbuch
Last change:
2012-3-1
2012-3-1
User Manual
HL1928M-L/R
Page 16 of
32
Caution
A power cable with PE conductor must be used which corresponds to the safety
requirements of the respective country of use.
requirements of the respective country of use.
5.6 Serial interface
Caution
No other units may be connected to the service socket. Connection or
disconnection of a unit may only be carried out by servicing personnel or those
trained by them. A Serial Spot Meter or Universal Serial Luminance Meter must
not be connected in the presence of patients.
disconnection of a unit may only be carried out by servicing personnel or those
trained by them. A Serial Spot Meter or Universal Serial Luminance Meter must
not be connected in the presence of patients.
The display has a serial RS 232 DIN6 interface sockets to update the SW.
6. Adjustments
6.1 Picture adjustment
This section describes the settings for operation of the flat panel display with a
video source. The most important settings are:
video source. The most important settings are:
Adjusting the graphics memory of the video source
As with all monitors, the flat panel display also has certain limits, e.g. maximum
resolution and vertical frequency. The graphics adapter must be set when using
the flat panel display such that the limits are observed.
resolution and vertical frequency. The graphics adapter must be set when using
the flat panel display such that the limits are observed.