Fountain People Inc. 0000010 Benutzerhandbuch
© 2008 FOUNTAIN PEOPLE, INC.
version 1.2
Activators
The DSC can test activators to determine if they are properly wired
and that they are correctly located in the aquatic playground.
Wired Activators
Each activator is wired to its own terminal location. This location
is associated with one or more water features as described in your
event table and electrical drawings.
is associated with one or more water features as described in your
event table and electrical drawings.
Starting on the Main Screen, press [SETUP] [3] [4]. This will display
the Input/Output Status screen. The terminal status is displayed for
the Input and Output Modules. The input modules are labeled as DCI
in the Type column.
the Input/Output Status screen. The terminal status is displayed for
the Input and Output Modules. The input modules are labeled as DCI
in the Type column.
Use the [UP ARROW] and [DOWN ARROW] keys to display the input
module you wish to test. At this point have someone press the
activator while watching for a ° to be displayed corresponding to
module you wish to test. At this point have someone press the
activator while watching for a ° to be displayed corresponding to
the terminal of the activator that has been pressed.
Note:
If the terminal displayed is not correct, the activator
wiring is connected to the wrong terminal. Check your electrical
drawings and site plan and make any necessary corrections.
Wireless Activators
Each activator sends its own address comprising of a group (A,B,C,
or D) and a code (1 thru 8). This address is associated with one or
more water features as described in your event table and electrical
drawings.
or D) and a code (1 thru 8). This address is associated with one or
more water features as described in your event table and electrical
drawings.
Starting on the Main Screen, press [SETUP] [3] [3] [1]. This will
display the Recent Transmits screen. The most recently activated
transmitters’ address (Group and Code) is displayed on line 1 with
the time the transmission occurred. The nine previous transmissions
are displayed as well on the following lines 2 through 10. At this
point have someone press the activator while watching for the
transmitters address and transmission time to be displayed on line 1.
display the Recent Transmits screen. The most recently activated
transmitters’ address (Group and Code) is displayed on line 1 with
the time the transmission occurred. The nine previous transmissions
are displayed as well on the following lines 2 through 10. At this
point have someone press the activator while watching for the
transmitters address and transmission time to be displayed on line 1.
Note:
If the address displayed is not correct, it is possible that the activator was installed in the wrong
location. At this point the activator can be moved or the events using this activator can be modified.
Input/Output Status
ID Type 12345678
²1³01 DCI: ±°±±±±±±
µ 02 ACO: ±±±±±±±±
µ 03 ACO: ±±±±±±±±
Recent Transmits
ID Time
1 A5 11:37 AM
µ A1 11:32 AM
3 A3 11:21 AM
4 A3 11:19 AM
5 A2 11:03 AM
6 A1 10:57 AM
17