L'Image Home Products Inc. 30310478 Benutzerhandbuch

Power Failure Light  

Automatically turns on when power goes off.
Automatic Night Light  

Functions as dusk to dawn night light.
Motion Sensor Light  

Automatically on when sensors detect a lack  

of ambient light and motion; automatically off 

when motion stops or with an increase in  

ambient light.

Rechargeable LED Flashlight 
Auto Dimming  

Under night light mode, unit auto adjusts  

to a lower brightness if no motion is detected  

by motion sensor for 23 seconds. 

Allows the unit to function as motion sensor (On) 

or as night light (Off).
On/Off button 
• When the unit is charging, press the button 

to turn the front panel LEDs on and off.

• 

When the unit is not charging, press the 

button once to turn on the LED on the front 

panel, press the button twice to switch light 

source from front panel LED to flashlight and 

press the button again to turn the unit off.

Charges Lithium-ion battery integrated in the  

LED power failure light.

Battery type: Integrated 3.7v 500 mAh  

LI-ion battery
Charging time: 8-10 hours
Runtime for power failure light: 90 minutes
Rating: 120VAC, 50/60Hz, 1.8W

®

FOR INDOOR AND DRY LOCATION USE ONLY.

DATE: Jan 26, 2015
ITEM/SKU #:  
DESCRIPTION: 2pk LED Power Failure Night Light

CUSTOMER/RETAILER: COSTCO USA
DESIGNER: AP

HEIGHT (FRONT):   in
HEIGHT (BACK):
LENGTH (FRONT):   in
WIDTH (SIDES):  1   

INSTRUCTION SHEET

WARNING: Changes or modifications to this unit not expressly 

approved by the party responsible for compliance could void the 

user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to Part 15 of the  

FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications.  However, 

there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct  

the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help. 

This device complies with Part 15 of the FCC Rules. Operation is subject 

to the following two conditions: (1) this device may not cause harmful 

interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

LIMITED WARRANTY  This product is guaranteed to operate a 

minimum of 1 year from the original date of purchase. If, under 

normal use and for the full time period, your product fails to operate, 

please return it to: Quality Control Dept., L’Image Home Products Inc.,  

15147 Don Julian Rd., City of Industry, CA., USA 91746 (with your 

original proof of purchase receipt) and we will refund it. This warranty 

is considered void if the product fails from misuse.

© 2015 Sunbeam Products, Inc. doing business as Jarden 

Consumer Solutions. All rights reserved. SUNBEAM

®

 is a 

registered trademark of Sunbeam Products, Inc. used under 

license. Distributed by L’Image Home Products Inc., Montreal, 

Canada H3B 3X9. LHP965-012615

CONTACT OUR CUSTOMER SERVICE AT 1-877-383-6399 (8:30 am - 5:30 pm E.S.T.).

 Risk of electric shock. This

product is not a toy and is not intended for 

use by children. For adult use only. Do not 

plug in extension cords. Indoor use only. 

For safe use, plug only into exposed wall 

outlets where night light is ventilated and 

cannot contact bed coverings or other 

material that may present a fire hazard.

STEP 1

STEP 2

Plug the induction charging cradle upright  

into a wall socket. (FIG. 1)

Place the LED power failure light onto 

the charging cradle. Charge for 24 hours 

before first use. Complete charging time  

is 8-10 hours thereafter. (FIG. 2)

OFF

ON

MO

TION SENSOR

MODEL # 30310478 / ITM. / ART. 956890

OFF

ON

MO

TION SENSOR

Induction 

charging 

cradle

Motion  

deactivation 

 switch

2 white LEDs  

for flashlight

16 blue LEDs  

for power failure / 

night light 

On/Off button

Photo and  

motion sensor