Protrac iD Pty Ltd 2T8000US Benutzerhandbuch
2T8000US ASSET / VEHICLE TAG
Product Information Sheet
The Protrac series 2 Active Tags are powered by an
internal lithium battery. The tag will, for the duration of
its life, transmit a Radio Frequency (RF) signal at a pre-
set time interval. The tag life is estimated at 5 years.
internal lithium battery. The tag will, for the duration of
its life, transmit a Radio Frequency (RF) signal at a pre-
set time interval. The tag life is estimated at 5 years.
The transmitted tag data includes Customer Site Code
(CSC), Tag ID, Tag Age Counter Value, Movement Alarm
and Tamper Alarm status. For protection against adverse
environmental conditions, Protrac Asset Tags are
encapsulated in a moulded plastic case, which is
ultrasonically sealed during the manufacturing process.
(CSC), Tag ID, Tag Age Counter Value, Movement Alarm
and Tamper Alarm status. For protection against adverse
environmental conditions, Protrac Asset Tags are
encapsulated in a moulded plastic case, which is
ultrasonically sealed during the manufacturing process.
The 2T8000US tag is generally used for Asset tagging
applications and is ideally suited for operating on metallic
surfaces (or plastics containing a high metal content).
applications and is ideally suited for operating on metallic
surfaces (or plastics containing a high metal content).
Optional Extras: in-built tamper switch for alarm upon
tag removal, motion sensing alarm, temperature sensor
for reporting ambient temperature.
tag removal, motion sensing alarm, temperature sensor
for reporting ambient temperature.
D e s c r i p t i o n
F e a t u r e s
· Active 24 x 7
· High Impact resistent UV stabalised PVC constructions.
· Transmission unaffected by materials in the surrounding environment.
· Easily fixed to all surfaces including metal.
· Convenient size (60mm x 29mm x 13mm) for application to large and small assets.
· Tags attached to road transport, rolling stock and cargo are monitored at speeds up to 220kph.
· Can be read by fixed, mobile or hand held receivers.
· High Impact resistent UV stabalised PVC constructions.
· Transmission unaffected by materials in the surrounding environment.
· Easily fixed to all surfaces including metal.
· Convenient size (60mm x 29mm x 13mm) for application to large and small assets.
· Tags attached to road transport, rolling stock and cargo are monitored at speeds up to 220kph.
· Can be read by fixed, mobile or hand held receivers.
S p e c i f i c a t i o n s
Model.................................
Frequency...........................
ERP....................................
Sensitivity...........................
Transmission Range..............
Variable Transmission Rate.....
Modulation..........................
Battery................................
Operational Temperature.......
Size....................................
Weight................................
Material...............................
Frequency...........................
ERP....................................
Sensitivity...........................
Transmission Range..............
Variable Transmission Rate.....
Modulation..........................
Battery................................
Operational Temperature.......
Size....................................
Weight................................
Material...............................
2T8000US
433.92 Mhz
<300 Micro Watts
-103 dBm
0.4 - 50 Meters
10 sec to 180 sec
OOK
Internal Lithium
-30°C to +70°C
60 x 29 x 13 mm
20 grams
UV Stabalised PVC (IP65)
433.92 Mhz
<300 Micro Watts
-103 dBm
0.4 - 50 Meters
10 sec to 180 sec
OOK
Internal Lithium
-30°C to +70°C
60 x 29 x 13 mm
20 grams
UV Stabalised PVC (IP65)
All rights reserved. Specifications subject to change without notice.
©
©
Protrac iD Pty Lt
Protrac iD Pty Lt
d
d
ABN: 58 002 648 704
ABN: 58 002 648 704
www
www
.protracid.com
.protracid.com
Made in
Made in
Australia
Australia
T
T
el: +61 7 3806 3224
el: +61 7 3806 3224
Fax: +61 7 3009 0050
Fax: +61 7 3009 0050
Email:
Email:
sales@protracid.com
sales@protracid.com
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution
any changes or modifications not expressly approved by
Protrac iD Pty Ltd could void the users authority to operate the
equipment.
NOTE:
equipment.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will
be required to correct the interference at their own expense.
rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will
be required to correct the interference at their own expense.