Andrew Wireless System M17P17P17P Benutzerhandbuch
4 Commissioning
Page
31
¾
Remove fibre-optic protective caps.
¾
Do not bend the fibre-optic cable in a tight radius (< 4 cm) as this may cause
cable damage and interrupt transmission.
cable damage and interrupt transmission.
¾
Using high-grade alcohol and lint-free cotton cleaning swabs, clean the end of
the fibre-optic cable that will be inserted in the optical connectors on the donor
interface box.
the fibre-optic cable that will be inserted in the optical connectors on the donor
interface box.
¾
Blow out the laser receptacle with clean and dry compressed air to remove
any particulate matter.
any particulate matter.
¾
Connect the fibre-optic cables by inserting the cable end into the laser
receptacle and aligning the key (on the cable end) with the keyed slot.
receptacle and aligning the key (on the cable end) with the keyed slot.
¾
Do not use any index-matching gels or fluids of any kind in these connectors.
Gels are intended for laboratory use and attract dirt in the field.
Gels are intended for laboratory use and attract dirt in the field.
4.3.1 Protective Plug
Connection:
A protective plug is provided for the connection of the fibre-optic cables.
Connection:
A protective plug is provided for the connection of the fibre-optic cables.
figure 4-11 Protective-plug assembly
)
Note:
Only high-quality connectors must be used for this type of plug.
Qualified brands are Diamond or Huber & Suhner.
Qualified brands are Diamond or Huber & Suhner.