F.I.T CO. LTD. FIT004 Benutzerhandbuch
S3 Graphics Video Wall Driver Package
User Guide
SG199-B.1 11/12/2010
Page
30
Appendix 2: How to set the discrete graphics as Primary
You may need to change your Primary display device if your motherboard has an integrated graphics
adapter. To do this you will need to enter the CMOS Setup utility. The typical method of entering the
CMOS Setup utility is by pressing one of the following keys while your computer is booting up: F1 / F2 /
DEL / ESC / F10. Some computers will display a message to indicate which key to press to enter the
BIOS/CMOS setup (e.g., “Press <F2> to enter BIOS setup”). Some older computers may also display a
flashing block to indicate when to press the F1 or F2 keys.
adapter. To do this you will need to enter the CMOS Setup utility. The typical method of entering the
CMOS Setup utility is by pressing one of the following keys while your computer is booting up: F1 / F2 /
DEL / ESC / F10. Some computers will display a message to indicate which key to press to enter the
BIOS/CMOS setup (e.g., “Press <F2> to enter BIOS setup”). Some older computers may also display a
flashing block to indicate when to press the F1 or F2 keys.
Once you have successfully entered the CMOS Setup utility, you may change your Primary display
device. Here are three examples of different vendors for setting the discrete graphics adapter to the
Primary display device. Use the Tab key and the arrow keys to navigate around the menus and the Page
Up/Down keys to change values.
device. Here are three examples of different vendors for setting the discrete graphics adapter to the
Primary display device. Use the Tab key and the arrow keys to navigate around the menus and the Page
Up/Down keys to change values.
Example 1: Phoenix/Award BIOS
Step 1: From the Main Menu, select: Advanced BIOS Features.
Step 2: Set “Init Display First” to “PCI Slot” and click Enter.