Grandstream Networks GXE5108 Benutzerhandbuch
Firmware Version 1.0.0.32 UCM6102/6104/6108/6116 USER MANUAL
Page 60 of 110
Dial 0 For Operator
If enabled, the caller can press 0 to exit the voicemail application and
connect to the configured operator's extension.
connect to the configured operator's extension.
Max Messages Per Folder
Configure the maximum number of messages in users' voicemail
folders. The default setting is 25.
folders. The default setting is 25.
Max Message Time
Configure the maximum length of the voicemail message (in seconds).
The default setting is 2 minutes.
The default setting is 2 minutes.
Say Message Caller-ID
If enabled, the caller ID of the user leaving the message will be
announced at the beginning of the voicemail message. The default
setting is disabled.
announced at the beginning of the voicemail message. The default
setting is disabled.
Say Message Duration
If enabled, the message duration will be announced at the beginning of
the voicemail message. The default setting is disabled.
the voicemail message. The default setting is disabled.
Play Envelope
If enabled, introduction of each message will be played when accessed
from the voicemail application. The default setting is enabled.
from the voicemail application. The default setting is enabled.
Allow Users To Review
If enabled, users can review the message before sending out. The
default setting is disabled.
default setting is disabled.
CONFIGURING VOICEMAIL GROUP
Voicemail Group can be configured under Web GUI->PBX->Call Features->Voicemail Group. In this
page, users could create voicemail group which contains members that will receive the voicemail if the
voicemail group extension has voice messages. Click on "Create New Voicemail Mail Group" to configure
the group.
Figure 26: Voicemail Group