ColorMaker Inc. PST Benutzerhandbuch
MORE Functions...............
Here are three more functions that will use the Shift key. Remember to press and hold the shift key while selecting
these functions.
these functions.
Beep-Beep
Some like it ON, some like it OFF.
This feature can be turned off and on. To change press and hold the Shift key then press Beep button which shares a
key with ColorRoll 3. There is no beep feedback or display when changing. If you hear the beep its ON if you don’t
its OFF.
Some like it ON, some like it OFF.
This feature can be turned off and on. To change press and hold the Shift key then press Beep button which shares a
key with ColorRoll 3. There is no beep feedback or display when changing. If you hear the beep its ON if you don’t
its OFF.
Shift + Q10 Feature
The PS-T10 has a special feature which allows you to select all fixtures regardless of the fixture address by press and
holding the Shift key then pressing Q10 also marked ALL. This sets the PS-T10 to communicate with all 10 fixtures
with addresses from 1 to 10. The display will indicate ALL when this feature has been activated. All 10 fixtures will
respond to any commands transmitted including RGB levels and ColorRoll 1,2 and 3. By releasing the shift key and
pressing any one of the Q1 through Q10 will disable the ALL feature and the PS-T10 will return to single fixture
operation.
The PS-T10 has a special feature which allows you to select all fixtures regardless of the fixture address by press and
holding the Shift key then pressing Q10 also marked ALL. This sets the PS-T10 to communicate with all 10 fixtures
with addresses from 1 to 10. The display will indicate ALL when this feature has been activated. All 10 fixtures will
respond to any commands transmitted including RGB levels and ColorRoll 1,2 and 3. By releasing the shift key and
pressing any one of the Q1 through Q10 will disable the ALL feature and the PS-T10 will return to single fixture
operation.
Shift + UP Feature
This feature displays the dimmer value of the current fixture without changing the value. This function works on all
three UP buttons with the red, green and blue back ground.
This feature displays the dimmer value of the current fixture without changing the value. This function works on all
three UP buttons with the red, green and blue back ground.
Try it. Press and release Q1 to select a fixture. Press the RED up key to display a value. Now press and hold the
Shift key and press the RED UP buttons. It will display the dimmer value without changing it. Cool !
Shift key and press the RED UP buttons. It will display the dimmer value without changing it. Cool !
Lets review what we have learned
You learned to Create, Record and Playback Scenes with adjustable Cross Fade.
You learned how to change Cross Fade Times, Dimmer Speeds, Controlling all fixtures with one button and lets not
forget Beep-Beep.
You learned to Create, Record and Playback Scenes with adjustable Cross Fade.
You learned how to change Cross Fade Times, Dimmer Speeds, Controlling all fixtures with one button and lets not
forget Beep-Beep.
Your now ready for advanced training, stay focused its really not a difficult feature to master.
Continue to Next Page
PS-T10
Functions: Beep, All, Shift UP
www.ColorMaker.net | help@ColorMaker.net | (407) 862-3363
4