MitraStar Technology Corporation DSL2401HNAT1CC Benutzerhandbuch

Chapter 4    Wireless 2.4GHz

42

Use the Advanced screen to configure advanced wireless settings. Click Network Setting > 

Wireless 2.4GHz > Advanced.

Figure 25 Network Setting > Wireless 2.4GHz > Advanced

 

Table 17   Network Setting > Wireless 2.4GHz > Advanced 

Fragmentation 

Threshold

Enter the maximum data fragment size that can be sent. 

Output Power

Set the output power of the Router. If there is a high density of APs in an area, decrease 

the output power to reduce interference with other APs. 

Preamble

Select a preamble type from the drop-down list menu. 

802.11 Mode

Select 802.11b to allow only IEEE 802.11b compliant WLAN devices to associate with the 

Router.
Select 802.11g to allow only IEEE 802.11g compliant WLAN devices to associate with the 

Router.
Select 802.11b+g to allow either IEEE 802.11b or IEEE 802.11g compliant WLAN devices 

to associate with the Router. The transmission rate of your Router might be reduced.
Select 802.11n to allow only IEEE 802.11n compliant WLAN devices to associate with the 

Router.
Select 802.11g+n to allow either IEEE 802.11g or IEEE 802.11n compliant WLAN devices 

to associate with the Router. The transmission rate of the Router might be reduced 

when an 802.11g wireless client is associated with it.
Select 802.11b+g+n to allow IEEE 802.11b, IEEE 802.11g or IEEE 802.11n compliant 

WLAN devices to associate with the Router. The transmission rate of the Router might 

be reduced when an 802.11b or 802.11g wireless client is associated with it.

Note: The transmission rate varies depending on the mode the wireless client uses to 

associate with the Router.

Channel Width

Select the wireless channel width that the Router uses.