MitraStar Technology Corporation DSL2401HNAT1CC Benutzerhandbuch

Chapter 5    Wireless 5GHz

46

Click Network Setting > Wireless 5GHz > WPS. Select Enable and click Apply to activate the WPS 

function. Then you can configure the WPS settings in this screen. 

Figure 28 Network Setting > Wireless 5GHz > WPS

Table 20   Network Setting > Wireless 5GHz > WPS 

Enabled WPS

Select Enable and click Apply to activate WPS on the Router.

WPS PBC

Click this to initiate push button configuration. Use PBC on each WPS-enabled device, 

and allow them to connect automatically.

WPS Station PIN

Add a client to the wireless network by entering the client’s Personal Identification 

Number (PIN) in the field and clicking the Add Enrollee button.

Note: You must also activate WPS on the client within two minutes.

WPS AP PIN

Add a client by entering the AP’s PIN from this field in the client’s WPS configuration. 

Click Generate New PIN to refresh it.