Vihaan Networks Ltd. RBTS850R2 Benutzerhandbuch

© VNL

®

 2010-2011, All rights reserved 

Commercial in Confidence                      

     Page 23 

 

When you start (power-up) the BSS node, it initiates the 

registration process and sends its information to the OMC 

server. The IP address of the communicating OMC server is 

in the default factory settings of the BSS node. The following 

steps take place during the registration of the BSS node: 

1.  When BSS node is powered-up, it tries to connect to the 

designated OMC over transmission control protocol (TCP) 

interface. 

2.  If the two-way communication is successful, BSS and 

OMC starts exchanging registration messages over TCP 

interface. 

3.  BSS provides its information in the registration request 

message. 

4.  OMC provides file transfer protocol (FTP) and simple 

network management protocol (SNMP) related 

information. For example, FTP user name, FTP 

password, SNMP agent port, SNMP manager trap port, 

SNMP read/write community, and other related 

information. 

5.  OMC starts fetching data from BSS over SNMP. 

LNote

: BSS is preconfigured with OMC IP address default 

factory settings. 

After configuration of BSS with FTP and SNMP, the BSS 

registers with the OMC and appears in the unAssigned 

hierarchy of the OMC GUI.