ELCON Systemtechnik GmbH 6618B Benutzerhandbuch
INSTALLATION
Eas yTrack
Version: 2004/06/17
Page 12
2.6 Installation instructions
See figure 2; wiring overview
•
Select any installation position in the vehicle.
•
Bore the fastening holes for the fastening angles.
Observe the above mentioned safety
instructions!
•
Fix the EasyTrack at the vehicle.
•
Establish the cable connection between
EasyTrack and vehicle.
To avoid short circuits, make sure that the
cables neither jammed nor cut off by flexible
vehicle parts!
•
Selection of a suitable position for the GPS and
GSM antennas.
Undisturbed satellite communication must be
ensured!
•
Bore the fastening holes and establish the cable
grommet for the GPS and GSM antennas.
Observe the above mentioned safety
instructions!
The GSM antenna is an stick-on-window mount style
antenna.
•
Establish the cable connection between the EasyTrack
and the GPS and GSM antennas.
Bend radius must be minimum 1cm!
figure 2; wiring overview
GSM antenna
GPS antenna
Car roof
Car chassis
Fastener for the fixing
•
Power input of EasyTrack
•
Input of
v
pulse and RPM pulse
•
3 digital input
•
wiring cable ( )