ELCON Systemtechnik GmbH 6618B Benutzerhandbuch
SAFETY INSTRUCTIONS
Eas yTrack
Version: 2004/06/17
Page 4
Safety Notes
Before installing and starting the device, read the
information given in the operating manual most carefully.
In doing so, you will take advantage of the device’s full
scope of functions and avoid damages due to improper
use.
• The device reflects the current state of the art and
complies with the applicable safety standards.
• Operate the device only in proper condition and strictly
according to the operating instructions.
• Works on the device, including its opening, must only
be done by authorized service personnel.
• For the electrical connection of the device, ensure the
correct line voltage (see chapter Technical Data)!
• Always disconnect the device from mains before you
open it!
• In the event of failure, please contact the manufacturer
or your agency in charge.
• Only end devices complying with the safety standard
according to EN 60950 and bearing the CE-mark, are
permitted to be connected to the interfaces of the
device.
• The end devices must have suitable plug connections,
otherwise appropriate adapters are to be used.
• End devices must only be operated at the interfaces
provided for.
Besides the safety notes mentioned above, you will find
complementary installation instructions in the according
chapters.
This operating manual is subject to change without notice.
For any further questions relating to the
configuration and installation of your device,
please refer to the manufacturer.