Arcadyan Technology Corporation WG4005DARC Benutzerhandbuch

■

Use this PC’s MAC address - This field is automatically filled in with the 
MAC address of the PC you are using to configure the Router. You 
should use this address only if you were previously using this 
computer to connect directly to your modem.

■

Enter a new MAC address manually - Use this option if you want to 
specify a new MAC address. Enter the new MAC address.

5 Check all settings and click Apply.

Figure 43   PPPoE Setup Screen

To setup the Router for use with a PPP over Ethernet connection, use the 
following procedure:

1 Select PPP over Ethernet in the IP Allocation Mode field. (

2 Enter your Primary DNS Address and Secondary DNS address.

Your ISP may provide you with primary and secondary DNS addresses. If 
they have been provided, enter the addresses in the appropriate text 
boxes. If not, leave 0.0.0.0 in the boxes.

3 Enter the Host Name (optional).

Some ISPs require a host name. If your ISP has this requirement, enter the 
host name in the Host Name text box.

4 Enter your PPP over Ethernet user name in the PPPoE User Name text box.

5 Enter a password in the PPPoE Password text box.